ͼ : ͼ駢 admin     ʶҹ admin      ҷ駢 ѹ : 13 չҤ 2562 00:55:02      ١Դҹ 47   47 / 0    ŴҴѡ ŴҴѡ 
: [ ]      ҹػó      ÷ȹ      ÷ȹ
ͧ :

Ը CTV SONY KV-F29MF1 ء



Ը CTV SONY KV-F29MF1 ء

> POWER > DISPLAY > Ţ 5 > VOL + > POWER

1. Ţ 1 - 4 ͡¡
2. Ţ 3 - 6 Ѻ駤
3. MUTE ѹ֡
4. Ţ 0 ׹ѹúѹ֡
5. POWER ͡ҡ SERVICE MODE 


Entering and adjusting the data values to SONY KV-F29MF1_KV-F29MH11_KV-F29MH31_KV-F29MN11_KV-F29MN31

Remote controls: RM-857 _ RM-858.

To enter the service mode, Press [ISPLAY][5] [VOL+] [POWER] in sequence.

The service manu display will be shown.  In this display, [00] is item number, [RGB] is adjustment data, [08] is the data value, [SERVICE] indicates service mode, [50] depends on signal. (For PAL and SECAM the value will be 50, and for NTSC it will be 60)

SERVICE MODE KEYS

[1],[4] - Select the adjustment item.
[3],[6] - Raise or lower the data value.
[Mute] - select WRITE.
[0] - Execute writing.
[7],[0] - The data becomes the values in memory.
[8],[0] - User control goes to standard dtate.
[5],[0] - Service data initilization.
[2],[0] - Write 50Hz adjustment to 60Hz and vice versa.

SERVICE MODE ADJUSTMENT METHOD.

This explanation shows how to use the buttons on the remote to select an item, and change its data value.  For example, select the item V-SHIFT (Vertical shift) is described here.
* Select item [24] V-Shift) [Use 1 & 4 buttons.
** Raise or lower the data value of this item by using 3 & 6 buttons.
*** Select the optimum value. [The standard value is 2E for PAL reception.
**** Write the adjusted value into memory by pressing [Mute] button.  The display changes from (SERVICE) to Green WRITE.
***** Execute the Writing by press [0] button.  The green WRITE display changes briefly to Red.  this indicates that the selected value has been written to mamory. during Write operation, WRITE display changes briefly to Red, then it returns ot SERVICE.
Use the same method to adjust all other items, which need to be adjusted. 

In WRITE the data of all items are written together into memory.





SONY Colour Television Receiver

Models : G-Series ,J-Series,
KV-G21M1,KV-G14F2RS,KV-2197M3(RM-870),KV-G14M1,KV-G14MD1,KV-G14P1,KV-G14P1,KV-G14P11,KV-G14Q1,KV-G14S1(RM-870),KV-J21MF1,KV-J21MH1,KV-J21MN11(RM-870),KV-2168MT,KV-2169MNT(RM-870),KV-XF29M35,KV-XF29M63,KV-XF29M93,KV-XF25M21,KV-XF25M63,KV-XF25M93 (RM-945).KV-XA21M80,KV-XA21M83.KV-XA21M50,KV-XA21M61,KV-XA21M60(RM-952),KV-XF25M81,KV-XF25M80(RM954),KV-F29MF1,KV-F29MH11,KV-F29MH31,KV-F29MN11,KV-F29MN31(RM-857),(RM-858)

For entering into service mode:
Press the remote control key in the following sequence 

STANDBY > DISPLAY > 5 > VOL+ > POWER 

> To raise/lower service item no: press numeric buttons 1 or 4
> To raise/lower data value: press: MUTING Button on handset
> To execute writing in memory; press 0 on handset
> To cancel service mode ; turn the TV into standby by pressing POWER button on thehandset, and then again switch on the TV by pressing the same button


Chassis : AE2,AE-2B,AP-2
Models: KV-E5231,KV-E2931,KV-E3431,KV-E2551A/B/E/K,KV-S29JN1/MN1/SN1,KV-S34/JN1/MN1/SN1/,KV-B2911,KR-S4613
For entering into Service Mode:


  • Turn on the main power switch of the set while pressing any two buttons on the front panel.TT will appear on the upper right corner of the screen. Press the MENU button onthe remote control handset. In menu select DEMO and press OK Select DEVICEcorresponding to the adjustment you need.
  • To store; OK
  • To exit: turn off the set.


Chassis: AE-2
Models: KV-B2911/A/D/B/K,KV-B2913E
For entering service mode:

Turn on the main power switch of the set while pressing any two buttons on the front panel.VOL will appear on the upper right corner on the screen. Press the MENU button onthe remote control handset.


Chassis : BE-4
Models : KV-2170,KV-2180,KV-2540
For entering into service mode:

Press remote control keys in the following sequence

? > 5 > VOL+ > TV > MENU
To exit: 00


Chassis : VE-3V,BE-3B
Models : KV-C2171K,KV-C2171K,KV-C2171KR,KV-X2501K,KV-X2581K,KV-X2581KR,KV-M2540K,KV-M2541K,KV-X2901K,KV-X2981K,KV-X2981KR,KV-M1440,KV-M2170,KV-M2171,KV-M2181,KV-M2101,KV-24WS1A/B/D/E/K/RU
(RM-837)Processor : CXP85340A-116Q/117Q 
For entering into Service Mode:

Press the remote control keys in the following sequence 

ON SCREEN DISPLAY > 5 > VOL+ > TV

 TT will appear at upper top corner.


Chassis : G1
Models : KV-S29RN1,KV-S34RN1
For entering into Service Mode :

Set the TV in on duty mode. Press from the board following button sequence 

DISPLAY > 5 > VOL+ > POWER 


Chassis :AE-2F
Models : KV-S2941A/B/D/K,KV-2943E
(RM-831)For entering into service mode:

Twice press button VKL on board. 
In a right top corner TT will appear then press buttonMENU


Chassis: BE-3D,BE-4
Models:KV-24WS1A/B/D/E/K/R/U
(RM-862)Processor : MSP3410B-PS-F7-T,MSP3410C-PS-C6-TKV-2181KR,KV-M2540,KV-29X1A/B/D/E/K/L/R/U

For entering into Service Mode:
Set the TV in on duty mode. Press from the board following button sequence 

ON SCREEN DISPLAY > 5 > VOL+ > TV






Ŵǧ SONY 
KV-F25MF1
KV-F25MN11
KV-F29MF1
KV-F29MH1
KV-29MH31

ǹŴ   [ Ṻ book1552414644.pdf ] [ Ҵ 1.42 MByte ]



Ѵ ˹ҷѷ ӡѴ ( Ҫ ) ͡ͺ෤մԨԵ ȭ